Product Introduction
Products Features
The serial lines are used for different sizes coils with different thickness to be slit not special strips as requirements. These products are for roll
mill, HF tube mill, cold forming machines, punching & press machines..ect. Raw material is CR coil car-un-coiler, guiding & pinch device, litter,
side, guiding device, looping, tensioner, scrap, recoiler, recoil car… etc
Main Tech Parameter
Type |
|
|
|
|
Material Thickness (mm) |
0.15-1.5 |
0.15-2.0 |
0.3-3.0 |
0.5-4.0 |
Width (mm) |
750-1300 |
1600-1800 |
1800-2000 |
200-1600 |
slitting Strips |
2-20 |
2-20 |
2-15 |
2-15 |
Product precision |
±0.1 |
±0.1 |
±0.15 |
±0.15 |
Linear Speed |
10-200/250 |
10-200/250 |
10-150/200 |
10-150/200 |
Coil Weight |
10T |
15T |
20T |
25T |
ID |
ø508/ø610 |
ø508/ø610 |
ø508/ø610 |
ø508/ø610 |
OD |
ø508 |
ø508 |
ø508 |
ø508 |
Blade Shaft |
ø205 |
ø220 |
ø240 |
ø240 |